Volucore.
Support
Your lace tagLIVE PREVIEW
Building…Length × height
— mmlong
— mmhigh
— mmthick
Sign in to download your design. View allowance
FROM SCREEN TO SNEAKER

Print it or cut it.

A smooth, closed model in millimeters, checked for gaps and folds before it reaches you. STL is the whole tag as one solid; 3MF keeps the name as a second color; SVG is for a laser cutter.

3D printing
Laser cutting

How it works

  1. 01

    Type a name, choose a font and set the height of the lettering.

  2. 02

    Pick a raised or indented finish, then set the lace width, the tag height and the corner radius.

  3. 03

    Choose a color for the tag and one for the name, and check the 3D preview.

  4. 04

    Download the 3MF, STL or SVG, slide the lace through both openings before lacing your shoe, and position the tag wherever you like.

Questions

How does a shoe lace tag work?

The tag has two narrow openings, one near each end. Slide the lace through both openings before you lace your shoe, then place the tag on the lace where you want it. The openings are sized from the width of your laces plus a little clearance, so the lace slides easily and the tag does not rotate.

What is the difference between raised and indented?

A raised name stands out of the tag and is easy to feel. An indented name is cut into the tag, and the floor of the recess is a separate part that can be a different color, or left to fill with paint or a paint marker.

How do I print it in two colors?

Choose the 3MF for your slicer. It opens with the tag and the name as two parts: the tag is filament 1 and the name filament 2 (pick the same color for one filament). Bambu Studio, OrcaSlicer and Cura use one 3MF; PrusaSlicer has its own.

Can I print it without supports?

Yes. The tag prints flat with its flat back on the bed, and the lettering is only a millimeter or two tall, so no supports are needed. A 0.4 mm nozzle with 0.12 to 0.2 mm layers works well.

How do I cut it with a laser?

Download the SVG. It is in millimeters: the red hairline is the cut (the outline and the two lace openings) and the black fill is the name to engrave. Run a small test cut first and adjust your machine's kerf.

Which lace widths does it fit?

Laces from 4 to 25 millimeters wide. Measure yours and set the lace width; the opening gets a little clearance on top of it. If the tag height is smaller than the opening needs, the tool raises it and tells you.

Which fonts can I use?

26 open-licensed fonts chosen to stay readable when the lettering is only a few millimeters tall: bold sans, rounded and playful, chunky display, tall and condensed, and serif and slab faces.

Can I sell what I make?

It depends on your plan. The Terms page explains what your account includes for selling printed items.

Is it free?

Sign in with Google or your email address to get a free monthly download allowance, shared by every Volucore tool. Each STL, 3MF or SVG download uses one.

Enjoying Volucore? Support it

Volucore is made by an independent developer. Your support makes it easier to add more tools and helps cover the developer's and hosting costs.

Support me on Ko-fi