Volucore.
Support
Your bag tagLIVE PREVIEW
Warped name detailFollows the curve of your initial
— mmwidth
— mmheight
3layers
Sign in to download your design. View allowance
FROM SCREEN TO BAG

Make it yours.

Cut lines for a laser, or a complete layered model for your 3D printer, in millimeters. STL is the shape alone; 3MF also carries your layer colors, one filament each.

3D printing
Laser cutting
VOLUCORE / BAG TAGPersonalized. Cut or printed. Made by you.

Emoji artwork: Noto Emoji, © Google LLC, SIL Open Font License 1.1.

How it works

  1. 01

    Choose a letter or an emoji, then type a name of up to 24 characters.

  2. 02

    Pick a font for the initial and a font for the name, move the keyring hole around the tag and choose how loose pieces of the name are tied down (Connect).

  3. 03

    Choose colors for the base, inner and top layers and check the flat laser view or the 3D view.

  4. 04

    Download the SVG for laser cutting, or an STL or a multicolor 3MF for 3D printing.

Questions

What is the warped name?

The name is cut in capitals and bent along the middle of the letter's stroke, with each letter as tall as the stroke is wide, so the letters meet the rim on both sides. With an emoji, the name is bent around a band that surrounds the artwork. A name that is too long for the letter shrinks to fit, down to about 3.6 mm tall.

How is the tag built?

Like a tray with three layers: the base plate (the initial grown by a border, with the keyring boss and hole), the inner layer (the body of the initial, sunk below the rim) and the top layer (a thin raised rim and the name). In 3D the plate and inner layer are 3 mm thick by default and the rim and name another 3 mm on top; the thickness can be set from 1.5 to 4 mm.

How do I laser cut it?

Download the SVG: the three layers sit side by side in millimeters, with the base in red, the inner layer in green and the top layer in blue. Send each color to its own sheet, stack the pieces in that order and glue them. 3 mm acrylic works well. Use Connect: Dots and letters so nothing in the name falls out when it is cut. Run a small test cut first and adjust for your machine's kerf.

How do I 3D print it?

Download an STL (shape only) or a 3MF with one filament per layer color. Print it flat, base down, with a 0.4 mm nozzle and 0.16 to 0.20 mm layers. Bambu Studio, OrcaSlicer and Cura read the first 3MF; PrusaSlicer has its own. Layers with the same color share a filament. Connect: None is the right choice for printing.

Can I use an emoji instead of a letter?

Yes. Search 1,657 emoji by name or keyword, or paste one. The emoji's outline is closed into a silhouette and grown by a 15 mm band that carries the name, and its own line art stands raised on the floor. Fine details thinner than about 1 mm may be too small for a 0.4 mm nozzle or a laser.

Which characters can the name use?

English letters, numbers and common symbols (ASCII), up to 24 characters. The name is always cut in capitals. If a font does not have a character, the tool says so.

Has it been printed and cut?

The geometry is checked by automated tests for every initial, every font and a wide sample of emoji, and the models are closed solids. We have not tested a physical print or cut of every combination, so print or cut a sample first and adjust for your machine.

Can I sell what I make?

It depends on your plan. The Terms page explains what your account includes for selling printed or cut items.

Is it free?

Sign in with Google or your email address to get a free monthly download allowance, shared by every Volucore tool. Each SVG, STL or 3MF download uses one.

Enjoying Volucore? Support it

Volucore is made by an independent developer. Your support makes it easier to add more tools and helps cover the developer's and hosting costs.

Support me on Ko-fi